top of page
IMG_7170_edited.jpg

Our Certificates

Bristeel is committed to maintaining the highest standards of quality and compliance, consistently staying up to date with all relevant certifications. Through continuous training, rigorous audits, and a proactive approach to industry regulations, Bristeel ensures that its processes and products always meet or exceed the latest certification requirements. This dedication to excellence guarantees reliability, safety, and customer satisfaction in every project.

Certificate-08A_API-5L.jpg
Exp. May 30, 2027

The American Petroleum Institute hereby grants to Bri-Steel Manufacturing the right to use the Official API Monogram® on manufactured products under the conditions in the official publications of the American Petroleum Institute entitled API Spec Q1 ® and APl-5L and in accordance with the provisions of the License Agreement. In all cases where the Official API Monogram is applied, the API Monogram shall be used in conjunction with this certificate number: 5L-0898

Exp. May 30, 2027

APIQR® certifies that the quality management system of Bri-Steel Manufacturing has been assessed by the American Petroleum Institute Quality Registrar (APIQR®) and found it to be in conformance with the following standard ISO 9001 :2015. The scope of this registration and the approved quality management system applies to the Manufacture of:

Certificate-08B_ISO_9001_2015.jpg
Certificate-08C_API_Q1.jpg
Exp. May 30, 2027

The American Petroleum Institute certifies that the quality management system of Bri-Steel Manufacturing has been assessed by the American Petroleum Institute and found to be in conformance with the following: API Specification Q1 The scope of this registration and the approved quality management system applies to the Manufacture of Steel Pipe Lines.

Exp. September 08, 2027

The document confirms that Bri-Steel Manufacturing produces ferritic seamless steel line pipe in compliance with ASTM/ASME, API 5L, and CSA Z245.1 standards. It verifies that the company has implemented a certified quality assurance system, assessed for compliance with the EU's Directive 97/23/EC on pressure equipment. Bri-Steel also meets the requirements for Type 3.1 material certificates under EN 10204:2004.

ped certificate.png
apega certificate.png
Exp. January 31, 2026

Integris International, Inc. ( DBA Bri-Steel Manufacturing), Hereby Authorized to Engage in the Practice of Engineering in the Province of Alberta from the Association of Professional Engineers and Geoscientists of Alberta ( APEGA )

2014 Bri-Steel Manufacturing Logo 300 DPI_edited.jpg
Edmonton Location
Enid Location

​(780) 469-6603​​

Fax:(780) 469-6986​

websales@bri-steel.com​​

2125-64 Avenue Edmonton, AB

T6P 1Z4 Canada

​​

  • Facebook
  • LinkedIn
  • Youtube

(539) BIG-PIPE

​Fax:(580)-327-2790

websales@bri-steel.com​​

2215 S Van Buren St Enid, OK  

73703 United States

bottom of page